Welcome, Guest. Please login or register.

Publicidad

Mensajes recientes

Páginas: [1] 2 3 ... 10
1
Hardware y software / Constant rebooting since 3.8
« Último mensaje por JensenBreck en 16 de Octubre de 2017, 11:59:56 am »
Hi,
Twice now I've found my Turris 1.0 in a reboot loop. It stays up 3 minutes and then reboots.

The first time it seemed to cure itself. The second time I left it for half an hour and it didn't fix itself. Eventually physically unplugging the power, waiting a few seconds, then plugging it back in worked.

Basic description: Almost factory Turris 1.0, running MWAN3 over two external connections configured as 2 X static IP (yes, I realise I have double-NAT).

Thanks!


I did not find the right solution from the Internet.


References:https://forum.turris.cz/t/constant-rebooting-since-3-8/5003



online product teaser


2
Hardware y software / Bug: update from 3.8 to 3.8.1 ignored “update approval needed” option
« Último mensaje por JensenBreck en 16 de Octubre de 2017, 11:58:46 am »
Hi,

Right after installing Turris OS 3.8, I turned on the "update approval needed" option, both on Turris 1.0 and Omnia, to avoid further problems caused by updates breaking the router while I was far away from it.

However, yesterday's update was installed without any warning and approval. Did anyone experience the same behavior? The approval is requested though when I add or remove any records from pkglists, which is rather annoying than useful.

Thanks!


I did not find the right solution from the Internet.


References:https://forum.turris.cz/t/bug-update-from-3-8-to-3-8-1-ignored-update-approval-needed-option/5071


successful marketing campaign examples

3
Hardware y software / IPv4 port 80 forward opens both Forris nad Luci through IPv6
« Último mensaje por JensenBreck en 16 de Octubre de 2017, 11:57:36 am »
Hi,
First I was surprised, that port forwarding is only IPv4 port forward.
Than I realised my mistake and uset Turris IPv6 address as AAAA record and found out, that Foris is (and was exposed the whole time).
I use correct IPv6 client address as AAAA record, but Forris is stil accessible - should it be blocked? Or I should not be worried to keep it opened?

Thank you

I did not find the right solution from the Internet.


References:https://forum.turris.cz/t/ipv4-port-80-forward-opens-both-forris-nad-luci-through-ipv6/5336



most creative advertisements
4
Hardware y software / OpenVPN as client over a specific wifi interface?
« Último mensaje por JensenBreck en 16 de Octubre de 2017, 11:56:41 am »
Hi,

I've been trying to set up OpenVPN as a VPN client keep a connection open over a specific wireless network.
So when I connect to the interface Wireless Network VPN I will be connected over a VPN tunnel using NordVPN service.

I did setup the the NORDVPN interface the same way as a guest interface to keep it separate from my LAN.
The Wireless VPN SSID is set up on the 5GHz card and attached to the NORDVPN Network but otherwise in the same way as the guest wireless which is on the 2.4GHZ card.

Please help.



Thanks!


I did not find the right solution from the Internet.


References:https://forum.turris.cz/t/openvpn-as-client-over-a-specific-wifi-interface/2050



online b2b marketing
5
Off Topic / Re:Carl english's recent activity?
« Último mensaje por Insanity en 15 de Octubre de 2017, 20:39:34 pm »
:|
6
Hardware y software / YouTube claiming changes
« Último mensaje por JensenBreck en 15 de Octubre de 2017, 12:26:32 pm »
Hi,

Just thought I'd share this with anyone here who has a partnership with someone. YouTube's making changes (again) and are removing the "claiming video" part of the partner programme, replacing it with Monetisation. So instead of a green C next to your video, it'll be a green dollar symbol. Annoyingly, this means you can't prevent a video from being monetised anymore (which you could when on the previous system of claiming)


Thanks!


I did not find the right solution from the Internet.


References:https://encodingtalk.com/threads/youtube-claiming-changes.3044/


animated explainer video


7
Hardware y software / The rise and fall of AMD
« Último mensaje por JensenBreck en 15 de Octubre de 2017, 12:25:39 pm »
Hi,

however it covers just how badly AMD has fared and it probably explains why all the processors they produce suck with Fraps (the exception seems to be the GPU arm: ATI, which does surprisingly well making independent graphics cards and not integrated CPU/GPU solutions)


What's your thoughts ?


Please help.



Thanks!


I did not find the right solution from the Internet.


References:https://encodingtalk.com/threads/the-rise-and-fall-of-amd.3093/



Product Teaser examples
8
Hardware y software / How to set up Dedicated SSD for Fraps?
« Último mensaje por JensenBreck en 15 de Octubre de 2017, 12:24:41 pm »


Hey guys, I just got an SSD and plugged it in to my computer.
Nothing seems to change when I record, it keeps the same fps on-screen compared to my HDD.
My question is, once you get an SSD how do you set it up properly?
Money or lifespan is not an issue, I just want to record.

Please help.



Thanks!


I did not find the right solution from the Internet.


References:https://encodingtalk.com/threads/how-to-set-up-dedicated-ssd-for-fraps.3217/


promotion animation


9
Hardware y software / Building a super computer to record 5760x1080@30fps
« Último mensaje por JensenBreck en 15 de Octubre de 2017, 12:23:00 pm »
Hey, I'm planning a build ~$5000 (that's including monitors, speakers, everything) to record in full Eyefinity resolution at 30 and play at 60 with the highest graphics settings (I'm a videophile).

Just wondering if anybody thought that getting 2133 mhz RAM is necessary or would help at all?

Please help.



Thanks!


I did not find the right solution from the Internet.


References:https://encodingtalk.com/threads/building-a-super-computer-to-record-5760x1080-30fps.3417/



whiteboard explainer video software
10
Off Topic / Carl english's recent activity?
« Último mensaje por City17 en 14 de Octubre de 2017, 14:54:59 pm »
Hi

Haha :blahblah:
Páginas: [1] 2 3 ... 10